1. There are many different models of binding machines, and the installation dimensions of the upper and lower molds of different binding machines are different. For this reason, when ordering binding dies, garment factories must determine the size of the die handle of the binding die according to their respective binding machines. 12mm two kinds.
2. Before binding the snap button to the fabric, the fabric must first take a hole, and the diameter of the hole should correspond to the size of the buckle foot (usually about half the diameter of the buckle foot).
3. When installing the binding die on the binding machine, the concentricity of the upper and lower die must be ensured, generally not exceeding 0.1mm.
4. The binding die is a relatively precise product, so when adjusting the die, it should be adjusted from loose to tight, and the position should not be adjusted too tight or too deep, otherwise it may cause damage to the binding die.
5. When binding, the position of the fabric should not make the buttons placed on the lower die skewed, otherwise it may affect the binding quality.
6. With the increase of binding times, the binding die will wear out. For this reason, in the production process, random inspections should be carried out. When double circles appear on the buckle feet of the eye ring and the snap button, the binding die should be replaced in time, otherwise the buckle feet may break after binding, which will affect the The quality and appearance of the garment.
7. When binding the button bead with the straight flute, it should be ensured that the deformation of the button bead before and after binding does not exceed 0.05mm, otherwise it may cause the consequences of non-standard buckle force.
